Table of Contents
Advertisement
Assigning Array Properties
Once a new array is completed, you can assign properties to the array.
CAUTION!!
Once the array is created and its properties are assigned, and you cannot
change the array properties using this utility.
To assign properties to the new array:
1. In the Array Properties menu (as shown in the screen below), select an array type
and press Enter. Only the available array types will be displayed on the screen.
(*RAID 0 or RAID 1 requires two drives.)
Figure 51: Selecting Drives to Create an Array
Figure 52: Assigning Array Properties
Vig410P Motherboard Manual
80
Advertisement
Table of Contents
