Viglen Vig410p Manual page 65

9. During the system boot-up, press the <Ctrl> and <I> keys simultaneously to run the
Intel RAID Configuration Utility when prompted by the following message: Press
<Ctrl> <I> for the Intel RAID Configuration Utility.
Note: The Intel RAID Configuration Utility is only available for systems with two or more
drives installed. The Intel RAID Utility screen will not display in systems with one drive
installed.
Using the Intel ICH10R SATA RAID Utility Program
Creating, Deleting and Resetting RAID Volumes:
1) After the system exits from the BIOS Setup Utility, the system will automatically
reboot. The following screen appears after Power-On Self Test.
Note: All graphics and screen shots shown in the manual are for reference only. Your
screens may or many won't look exactly the same as the graphics shown in this
manual.
2. When you see the above screen, press the <Ctrl> and the <I> keys simultaneously
to have the main menu of the SATA RAID Utility appear:
Figure 36: Entering the Intel ICH10R SATA Utility
Vig410P Motherboard Manual
64