Viglen Vig750s Bios Update Instruction

BIOS Update Instruction for the Vig750s Motherboard

Before initiating a BIOS update, be sure to read and precisely follow the instructions included in
this document.

If a BIOS update process is interrupted or the incorrect BIOS is flashed, your system may not
function properly and can possibly damage the motherboard.

Before updating the BIOS on the Viglen Desktop Board, manually record all BIOS settings that have
been changed (from default) so they can be restored after completing the BIOS update
There are up to four methods of updating BIOS to the latest Viglen approved version.
The number of options made available for any particular board may vary depending on BIOS
Support, drive support and BIOS update file size. You only need to use one.
•
EZ-Flash 3 Update
•
Recovering the BIOS - CrashFree BIOS 3 (recover corrupted BIOS)
•
Windows\WinPE BIOS Update
•
Express BIOS update
Latest BIOS files and Utility are available from Viglen FTP site:
http://download.viglen.co.uk/files/Motherboards/Vig750s
BIOS Update Instructions using EZ-Flash Method:
For this method, you will require a Flash USB device and required BIOS file.
1. Insert the USB flash disk that contains the latest BIOS file to the USB port.
2. Select <Del> or <F2> to Load BIOS Setup.
3. Enter the Advanced Mode (F7) of the BIOS setup program. Go to the Tool menu to select ASUS EZ
Flash Utility and press <Enter> to enable it.
XMA Limited
,
VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
01727 201 850 01727 201858
Tel: | Fax:
PMPAS750-Vig750s
Figure 1 – ASUS EZ Flash 3 Utility
technical@viglen.co.uk
| Email:
www.xma.co.uk
| Web: