Table of Contents
Advertisement
B. Specify the location of the ROM fi le and select the proper protocol (XModem).
C. Press <Send> to start ROM File extraction. (See the picture below.)
D. Once the ROM file extraction is completed, the message: "New BIOS received
OK" will display.
8. Once remote BIOS fl ash is completed, the system will reboot.
Note:
AMIBIOS Serial Flash will work with any terminal communications program that
supports VT-100 and XModem protocols, including protocols designed for GNU/LINUX
& BSD operating systems such as minicom. It is recommended that the terminal
program be configured to use the 'CR/LF' style of line termination.
Figure 72: ROM File extraction
Figure 73: Flash Update Successful
Vig410P Motherboard Manual
121
Advertisement
Table of Contents
