1. Manuals
  2. Brands
  3. Viglen Manuals
  4. Motherboard
  5. Vig850G
  6. Manual

Viglen Vig850G Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Vig850G
Motherboa
rd
Manual
.
.
C O M P U T E R S
N E T W O R K S
S O L U T I O N S

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vig850G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Viglen Vig850G

Summary of Contents for Viglen Vig850G

  • Page 1 Vig850G Motherboa Manual C O M P U T E R S N E T W O R K S S O L U T I O N S...

  • Page 2: Ce Marking

    Viglen, EMC and the ‘CE’ mark CE Marking European standards are being harmonised across borders. If products comply with the same standards in all European countries, product exporting and importing is made simple - paving our way to a common market. If you buy a product with a 'CE' mark on it (shown below), on the box, in the manual, or on the guarantee - it complies with the currently enforced directive(s).

  • Page 3: Viglen's Environment Laboratory

    Viglen’s Environment laboratory To gain a 'CE' mark, the Viglen computer range has had to undergo many difficult tests to ensure it is Electromagnetically Compatible. These are carried out in the in- house 'Environment lab' at Viglen Headquarters. We have made every effort to guarantee that each computer leaving our factory complies fully with the correct standards.

  • Page 4: Trademarks

    International Business Machines Corporation. Core i3/i5/i7 and Pentium® are registered trademarks of Intel® Corporation. All other trademarks are acknowledged. Genie, Vig, Viglen, and Omnino are trademarks of XMA Limited. Copyright and Patents This manual and all accompanying software and documentation are copyrighted and all rights reserved.

  • Page 5: Table Of Contents

    Contents CE Marking ..........................2 Introduction to EMC ......................2 Viglen’s Environment laboratory ................... 3 Please note ..........................3 Trademarks ..........................4 Copyright and Patents......................4 Liability ........................... 4 Chapter 1 Motherboard Overview ..................8 Introduction ........................8 Feature Summary ......................9 1.2.1...
  • Page 6 Trusted computing ................... 36 AMT Configuration ................... 37 Super IO Configuration ..................37 Hardware monitor ................... 38 S5 RTC wake settings ..................38 CPU configuration .................... 39 SATA Configuration ..................39 OS configuration ....................40 3.3.6 Chipset ........................40 V1.0 Vig850G Motherboard Manual...
  • Page 7 Discard Changes & reset .................. 43 3.3.10 Windows UEFI mode for Windows 8/8.1 ............44 3.3.11 BIOS Settings for Windows 7 Operating System (Non UEFI Mode) ....44 Chapter 4 :Suggestions ....................45 Questionnaire ........................ 45 Notes ..........................47 V1.0 Vig850G Motherboard Manual...

  • Page 8: Chapter 1 Motherboard Overview

    It contains the CPU, memory and graphics circuitry that make the computer work in the correct manner. The Vig850G motherboard is a Thin Mini ITX form factor. The motherboard offers DisplayPort and HDMI with LVDS display, High Definition Audio via 2 flexible audio jacks and integrated 10/100/1000 network connection, as well as 4 USB 3.0 ports to...

  • Page 9: Feature Summary

    Support Intel® InTruTM 3D, Quick Sync Video, Intel® Clear Video HD Technology, and Intel® InsiderTM 1.2.6 Audio  Realtek® ALC887-VD 8-Channel High Definition Audio CODEC o Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking, Anti-pop Function 1.2.7 LAN  Intel® I219LM Gigabit Ethernet Controller V1.0 Vig850G Motherboard Manual...

  • Page 10: Sata

     1 x M.2 slot: E-key, PCIe 3.0 x4, Supports NGFF-2230 1.2.11 Rear I/O Ports  1 x DC_IN  1 x RJ45  4 x USB 3.0  1 x HDMI  1 x DisplayPort  1 x Line Out  1 x MIC In V1.0 Vig850G Motherboard Manual...

  • Page 11: System Board Connectors

    36 Serial port cable connector 17 SATA 6GB/s 37 PCI express x4 slot 18 SATA 6GB/s 38 M.2 slot X4 19 SATA 6GB/s 39 Digital mic connector 20 Hard disk power connector Table 1: System Board Components V1.0 Vig850G Motherboard Manual...

  • Page 12: Cpu And Chassis Fan Connectors (2-Pin Cpu_Fan, 4-Pin Cha_Fan)

    Speaker connector (4-pin SPEAKER) The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. 1.3.6 System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. V1.0 Vig850G Motherboard Manual...

  • Page 13: Usb 3.0 Connector (20-1 Pin Usb3_12)

    If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD Audio]. If you want to connect an V1.0 Vig850G Motherboard Manual...

  • Page 14: Serial Port Connector (10-1 Pin Com1)

    Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis. 1.3.14 NFC connector Connect a NFC module to this connector to allow Near field communication devices to connect to each other. V1.0 Vig850G Motherboard Manual...

  • Page 15: Rear Panel Connectors

    Figure 3: RJ-45 LAN Connector 1.4.3 (3) Line Out port (lime) This port connects to a headphone or a speaker. In the 4.1, 5.1 and 7.1-channel configurations, the function of this port becomes Front Speaker Out. V1.0 Vig850G Motherboard Manual...

  • Page 16: 4) Microphone Port (Pink)

    This port is for any Display Port compatible device. 1.4.7 (7) HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector, and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected content. V1.0 Vig850G Motherboard Manual...

  • Page 17: System Board Options

    - System Board Options Upgrades The Vig850G motherboard is supports Intel® Core i3, i5, i7 and Pentium processors in the LGA1151 socket. RAM can be upgraded to a maximum of 32GB using DDR4 2133MHz Non ECC Unbuffered SODIMMs. WARNING! Unplug the system before carrying out the procedures described in this chapter.

  • Page 18: Upgrade Procedures

    Upgrade Procedures Make sure you are earthed and free of static charge before you open the computer case. If you are unsure about upgrading your computer, return it to Viglen so a qualified engineer can perform the upgrade. Steps to take to prevent static discharge: 1.
  • Page 19 Figure 6: Remove the processor from the protective cover Remove the processor from the protective cover Note: Do not discard the processor cover. Always replace the processor cover if you remove the processor from the socket. V1.0 Vig850G Motherboard Manual...
  • Page 20 7, B) and that the notches on the processor align with the posts on the socket (Figure 7, C). Lower the processor straight down without tilting or sliding it in the socket (Figure 7, A). Figure 7: Install the processor V1.0 Vig850G Motherboard Manual...
  • Page 21 (Figure 8, C, and D). The socket cover (Figure 8, B) will pop off as shown. Figure 8: Secure the load plate in place 6. Pick up the socket cover and remove it from the desktop board. V1.0 Vig850G Motherboard Manual...
  • Page 22 (see Figure 9). A fan with a 4-pin connector as shown in Figure 9 is recommended. 1. Make sure the four hooks are in the proper position before you install the cooler. Figure 9: Connecting the processor fan V1.0 Vig850G Motherboard Manual...

  • Page 23: Installing & Removing Memory Modules

    6. When the DIMM is seated, push down on the top edge of the DIMM until the retaining clips at the ends of the socket snap into place. Make sure the clips are firmly in place. 7. Replace the computer cover. Figure 10: Memory Installation V1.0 Vig850G Motherboard Manual...
  • Page 24 Hold the DIMM by the edges, lift it away from the socket, and store it in an antistatic package. 5. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM sockets. Figure 11: Removing Memory Modules V1.0 Vig850G Motherboard Manual...

  • Page 25: Pci Express 3.0/2.0 X4 Slot

    Important: When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes. V1.0 Vig850G Motherboard Manual...

  • Page 26: Chapter 2 Solving Problems

    (also called warm reset). Cold boot: Clear the system memory, halt Power off/on or reset button (at front of the power to all peripherals, restart POST, and system) reload the operating system. V1.0 Vig850G Motherboard Manual...

  • Page 27: Troubleshooting Procedures

    Errors that prevent the boot process from continuing (fatal errors), are communicated by a series of audible beeps. If this type of error occurs, refer to the error codes and messages listed at the end of this chapter. 6. Confirm that the operating system has loaded. V1.0 Vig850G Motherboard Manual...

  • Page 28: Problems & Suggestions

    Check that the brightness and contrast controls are properly adjusted. Check that the video signal cable is properly installed. Make sure a video board is installed, enabled, and the jumpers are positioned correctly. Reboot the system. Table 3: Problems and Suggestions V1.0 Vig850G Motherboard Manual...
  • Page 29 This indicates a fatal system error that requires immediate service attention. Note the screen display and write down any beep code completing POST emitted. Provide this information to your dealer service department / Technical Support. Table 4: Problems and Suggestions Continued V1.0 Vig850G Motherboard Manual...

  • Page 30: Chapter 3 System Bios

    (also known as the CMOS RAM) and provides a special Setup program to change this information. The BIOS in your Viglen computer is guaranteed to be fully compatible with the IBM BIOS. It has been written by American Megatrends Inc, an industrial leader in the field of BIOS software.

  • Page 31: Managing And Updating Bios

    Managing and updating BIOS 3.3.1 Introduction There are up three methods of updating BIOS to the latest Viglen approved version. The number of options made available for any particular board may vary depending on BIOS Support, drive support and BIOS update file size. You only need to use one.

  • Page 32: Bios Setup Program

    OFF and On or pressing the RESET button. You may also restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. Control Keys Figure 13: BIOS control keys After entering the BIOS, the first screen you will see is the Main Menu V1.0 Vig850G Motherboard Manual...

  • Page 33: Main Menu

    Main shows the Main menu items. 3.3.4 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system V1.0 Vig850G Motherboard Manual...

  • Page 34: System Language [English]

     If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password.  The Administrator or User Password items on top of the screen show the default Not Installed. After you set a password, these items show Installed. V1.0 Vig850G Motherboard Manual...
  • Page 35 2. From the Enter Current Password box, key in the current password, then press <Enter>. 3. From the Create New Password box, key in a new password, then press <Enter>. 4. Confirm the password when prompted. V1.0 Vig850G Motherboard Manual...

  • Page 36: Advanced Menu Screen

    NOTE: Be cautious when changing the settings of the advanced menu items. Incorrect field values can cause the system to malfunction. Figure 16: Advanced Sub Menu Screen Trusted computing The items in this menu show the TPM settings for the motherboard. V1.0 Vig850G Motherboard Manual...

  • Page 37: Amt Configuration

    AMT Configuration The items in this menu allow you to configure the Intel AMT settings. Figure 17: AMT Configuration Super IO Configuration Allows you to set the Super IO configuration. Figure 18: Super IO Configuration V1.0 Vig850G Motherboard Manual...

  • Page 38: Hardware Monitor

    This menu allows you to check the setitngs for CPU or system fans. You can also check the temperature of the system. Figure 19: Hardware monitor S5 RTC wake settings The items in this menu allow you to change the RTC features. Figure 20: S5 RTC wake settings V1.0 Vig850G Motherboard Manual...

  • Page 39: Cpu Configuration

    Here you can select the settings for the CPU, such as hyperthreading and speedstep. Figure 21: CPU Configuration SATA Configuration Here in SATA configuration, you can select the SATA mode, Hot plug settings and the M.2 SATA settings. Figure 22: SATA Configuration V1.0 Vig850G Motherboard Manual...

  • Page 40: Os Configuration

    OS configuration allows you to set up the boot settings, you can also choose between legacy or UEFI drivers. Figure 23: OS Configuration 3.3.6 Chipset The chipset menu lets you change the LVDS settings, the VD-t settings, NFC settings and the SATA settings Figure 24: Chipset Menu V1.0 Vig850G Motherboard Manual...

  • Page 41: Boot Menu

    3.3.7 Boot menu The Boot menu items allow you to change the system boot options. Figure 25: Boot Menu V1.0 Vig850G Motherboard Manual...

  • Page 42: Security Menu

    Windows UEFI mode Figure 26: Security menu 3.3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. V1.0 Vig850G Motherboard Manual...

  • Page 43: Restore Defaults

    Select Yes to save changes and exit. Discard Changes & reset This option allows you to exit the Setup program without saving your changes. When you select this option, a confirmation window appears. Select Yes to discard changes and exit. V1.0 Vig850G Motherboard Manual...

  • Page 44: Windows Uefi Mode For Windows 8/8.1

    BIOS settings for Windows 7 and Windows 8/8.1 O/S 3.3.10 Windows UEFI mode for Windows 8/8.1 Vig850G system configured with Windows 8/8.1 will have following default BIOS settings. If you wish to downgrade to Windows 7 then BIOS must be configured to Non-UEFI mode.

  • Page 45: Chapter 4 :Suggestions

    XMA has listed some questions that you may like to answer and return to Viglen. This will help Viglen help to keep and improve the standard of their manuals. 1. Is the information provided in this and other manuals clear enough? 2.
  • Page 46 Are there any technological improvements that could be made to the system? 7. Other points you would like to mention? Please return this slip to: Product Development Dept. XMA Ltd. 7 Handley Page Way Colney Street St Albans Hertfordshire AL2 2DQ V1.0 Vig850G Motherboard Manual...

  • Page 47: Notes

    Notes V1.0 Vig850G Motherboard Manual...

Table of Contents