Motherboard Connectors - Viglen Vig410p Manual

Motherboard Connectors

There are connectors on the Motherboard for FAN, Power supply, CD audio, & Front
Panel Connectors. The location and/or details of these connections are shown below.
 Front panel connections
The following are all connectors situated along the right edge of the Motherboard.
They are often connected to buttons and LED's situated on the front panel.
A- NMI
This non-maskable interrupt
B- Power LED
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
C- HDD (Hard disk drive) LED
This 2-pin connector is for the HDD activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
Figure 6: Front panel connections
Vig410P Motherboard Manual
25