Table of Contents
Advertisement
T-SGPIO Headers
Two SGPIO (Serial General Purpose Input/Output) headers are located on the
Motherboard. These headers are used for SATA monitoring on the backplane. Refer to
the board layout below for the locations of the headers.
CD-In Connector
There is a 4-pin CD header (CD1) on the Motherboard. This header allows you to use
the onboard sound for audio CD playback. Connect an audio cable from your CD drive
to the CD header that fits your cable's connector.
A
Figure 14: Power SMB and SGPIO connectors
A- CD-In
Figure 15: CD-In connector
Vig410P Motherboard Manual
A- T-SGPIO-1
B- T-SGPIO-2
32
Advertisement
Table of Contents
