Viglen Vig410p Manual page 93

Installing Intel's ICH10R Driver by Adaptec and Installing the
OS
1. Copy the Adaptec Embedded Serial ATA Raid Controller Drivers for the appropriate
OS to a formatted diskette. These drivers can be found on the Viglen driver CD
provided with the system.
2. Reboot system.
3. Insert the Microsoft Windows OS Setup CD in the CD Driver, and the system will
start to boot up from CD.
4. Press the <F6> key when the message-"Press F6 if you need to install a third party
SCSI or RAID driver" displays.
5. When the Windows OS Setup screen appears, press "S" to specify additional
device(s).
6. Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller Driver"
into Drive A: and press the <Enter> key.
7. Choose "ICH10R Driver by 3
Windows OS Setup Screen, and press the <Enter> key.
8. Press the <Enter> key to continue the installation process. (If you need to specify
any additional devices to be installed, do it at this time.) Once all devices are
specified, press the <Enter> key to continue with the installation.
9. From the Windows OS Setup screen, press <Enter>. The OS Setup will
automatically load all device files, and, then, continue with the Windows OS
installation.
10. After Windows OS Installation is completed, the system will automatically reboot.
rd
Party (Adaptec)" from the list indicated in the
Vig410P Motherboard Manual
92