Viglen Vig410p Manual page 39

3. Hold the CPU at the north and south edges.
4. Align the CPU key, which is the semi-circle cut-out against the socket key, which is
the notch below the gold colour dot, on the side of the socket.
5. When both CPU and the sockets are aligned, carefully lower the CPU straight down
into the socket (Do not rub the CPU against the surface of the socket or its pins to
avoid damaging the CPU or the socket.)
Figure 23: Holding the CPU
Figure 24: Aligning the CPU
Figure 25: Aligning the CPU
Vig410P Motherboard Manual
38