Table of Contents
Advertisement
Rebuilding Arrays
Notes:
1. Rebuilding applies to Fault Tolerant array (RAID 1) only.
If an array Build process is interrupted or when one critical member is missing, you
must perform a Rebuild to restore its functionality. For a critical array rebuild
operation, the optimal drive is the source drive.
2. If no spare array exists and a hard disk drive fails, you need to create a spare
before you can rebuild an array.
To Rebuild an array:
From the Main Menu, select Manage Arrays (as shown in the screen below). From the
List of Arrays, select the array you want to Rebuild.
Press <Ctrl> and <R> to Rebuild.
Figure 57: Rebuilding Arrays
Vig410P Motherboard Manual
86
Advertisement
Table of Contents
