Ide/Sata Configuration - Viglen Vig410p Manual

Intel I/OAT
The Intel I/OAT (I/O Acceleration Technology) significantly reduces CPU overhead by
leveraging CPU architectural improvements, freeing resources for more other tasks.
The options are Disabled and Enabled.
Active State Power Management
Select Enabled to start Active-State Power Management for signal transactions
between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving and
transaction speed. The options are Enabled and Disabled.
Route Port 80h Cycle to
Use this item to decide where to route Port 80h Cycle to. The Options are LPC and
PCI.
USB Functions
This feature allows the user to decide the number of onboard USB ports to be enabled.
The Options are: Disabled, 2 USB ports, 4 USB ports, 6 USB ports, 8 USB ports, 10
USB ports and 12 USB ports.
USB 2.0 Controller
Select Enabled to activate the onboard USB2.0 controller. The options are Enabled
and Disabled.
Legacy USB Support
Select Enabled to use Legacy USB devices. If this item is set to Auto, Legacy USB
support will be automatically enabled if a legacy USB device is installed on the
Motherboard, and vise versa. The settings are Disabled, Enabled and Auto.

IDE/SATA Configuration

When this submenu is selected, the AMI BIOS automatically detects the presence of
the IDE devices and displays the following items:
SATA#1 Configuration
If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while selecting
Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compatible
and Enhanced.
Configure SATA#1 as
This feature allows the user to select the drive type for SATA#1. The options are
IDE, RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID
Code Base will appear.
Vig410P Motherboard Manual
105