Upgrading System Memory - Viglen Vig430p Manual

Upgrading System Memory

CAUTION!!
Exercise extreme care when installing or removing DIMM modules to prevent any
possible damage. Also note that the memory is interleaved to improve performance!!
To install DIMM:
1. Insert the desired number of DIMMs into the memory slots, starting with P1-DIMM 1A. For
best memory performance, please install memory modules of the same type and same
speed on the memory slots as indicated on the tables below. (See System Memory, Page
17.)
2. Insert each DIMM module vertically into its slot. Pay attention to the notch along the bottom
of the module to prevent inserting the DIMM module incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the slot. Repeat for all
modules.
Figure 25: Installing Memory Modules
Vig430P Motherboard Manual
38