Canopy Facial Replacement - ergoline Genesis Classic 650 Owner's Manual

Tanning bed
Table of Contents

Advertisement

Relamping Instructions

Canopy Facial Replacement

1. To detach top unit acrylic apply pressure to the
acrylic assembly and rotate the acrylic latches
clockwise. The acrylic assembly is attached with
two retainers, one at the head and one at the foot
end of the canopy. (Refer to Illustration L 10)
2. After detaching the acrylic assembly carefully
lower the front of the assembly down resting the
assembly on the base of the unit.
(Refer to Illustration L11)
3. Remove twist lock concealment panel by
removing the two philips screws.
(Refer to Illustration L12)
4. Using a large screwdriver or coin turn filter
retaining locks 1/4 turn and remove VIT filter lens.
(Refer to Illustration L12)
5. Remove facial lamp using a pair of needle
nose offset pliers. Carefully place the pliers on
the ceramic lamp base and apply outward
pressure. (Refer to Illustration L13)
6. Clean the VIT reflector with a damp cloth.
7. Prior to handling the new facial lamp it is
important not to touch the glass envelope of the
lamp with you hands. The oil from your finger
prints will cause the lamp to malfunction and
rupture.
8. To install the facial lamp, using the offset
pliers, grip the lamp by the ceramic base and
insert in the lamp socket. You should note that
the lamp socket has two different diameters of
pin contacts and may only be installed in one
direction. (Refer to Illustration L13)
9. Prior to installing the VIT filter panel inspect
the operation of the safety switch. Depress the
safety switch and release. The switch should
spring back to its full extension after it is re-
leased. (Refer to Illustration L13)
10. Clean VIT filter lens with a damp cloth. Insert
filter panel fully into grove at the top of the
cassette and align in place. Attach filter with the
retainer locks. The letters VIT 2.3 must be legible
from the outside of the cassette.
(Refer to Illustration L12)
11. Repeat Steps 1 through 3 in reverse order to
reassemble unit.
Illustration L10
Illustration L 11
Illustration L12
Illustration L13
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents