Removing The Canopy Panel - ergoline PASSION 300-S SUPER POWER Operating Instructions Manual

Cleaning and maintenance
46/80
5.7.3

Removing the canopy panel

– Remove the screws. First remove the outside screws and then remove
the screws in the middle.
– Push the canopy panel to the rear with one hand and pull it out of the
front guide with the suction cup.
– Carefully lay the panel aside on the scratch protection (service kit).
– Remove the canopy panel with the aid of a helper.
The assembly is the same process in reverse order.
When assembling the device please note:
– Use the scratch protection.
– Carefully lay the canopy panel in the guide.
– Remove fingerprints and other soiling carefully.