Remove The Canopy Panel - ergoline INSPIRATION 600 Operating Instructions Manual

Cleaning and maintenance
44/68
DANGER!
Danger of crushing fingers when inserting the front
panel!
Fingers can be jammed when pressing in the front panel.
– Do not hold fingers between the front panel and the bed
base when pressing.
The assembly is the same process in reverse order.
When assembling the device please note:
– Clean the partition.
– Hold the partition with a cloth in order to prevent finger prints.
4.7.3

Remove the canopy panel

– Turn the locks through 90°: first the outer locks, then the lock in the mid-
dle.
– Support the canopy panel with one hand so that it does not fall down.
– Carefully lay the canopy panel aside.
The canopy panel must be completely removed from the device in order to
replace the lower, long UV low pressure lamps.
– Undo the cable tie and unplug the connector.