Cleaning and maintenance
46
–
Remove the partition.
The assembly is the same process in reverse order.
When assembling please note:
–
Clean the partition.
–
Hold the partition with a cloth in order to prevent finger prints.
5.7.2
Remove the canopy panel
–
Undo the screws. Remove the outside screws first and then remove the
screws in the middle.
–
Support the canopy panel with one hand so that it does not fall down.
–
Carefully lay the canopy panel aside.
The canopy panel must be completely removed from the device in order to
replace the lower, long, low pressure UV lamps.
–
Undo the cable ties and unplug the connectors.