Operating The Control Panel; Switching The Lip Illumination On And Off; Idle Mode - ergoline Genesis Classic 650 Owner's Manual

Operating The Control Panel

1. Intensity indicator, body fan, top or foot end.
2. Intensity indicator, body fan, bottom or head end.
3. Intensity indicator, facial tanners (4 settings). After
switching on the sunbed/facial tanner, the indicator
will flash for 1 minute (Off delay). If the facial tanner is
switched off and then back on again while tanning is in
progress, the indicator will flash for 1 minute
(On delay).
4. Air conditioning ON indicator (the indicator will flash
for 3 minutes if the air conditioning system is
switched off and then back on again while tanning
is in progress. (Option not available on all models)
5. Shoulder tanner ON indicator,
6. Display of elapsed tanning time in minutes/seconds.
7. Stop/Start, not in use on US version, see Timer
Instructions, page 22.
8. Shoulder tanner ON/OFF.
9. Air Conditioning system ON/OFF (ON delay of 3
minutes, see item 4).
10. Facial tanner intensity key (intensity selected in
steps of one second; keeping minus key pressedat
lowest setting for longer than 3 seconds will switch off
facial tanner - ON delay 1 minute described in
item 3).
11. Body fan intensity control, bottom or head end.
12. Body fan intensity control, top or foot end.

Switching the Lip illumination on and off

The illumination will come on when sunbed is first started. The illumination switches off automatically
while tanning is in progress. On completion of the post session cooling delay , the illumination can be
switched off by pressing the stop key. The illumination switches off automatically after the running time
has elasped.

Idle mode

Function of controls and indicators
A Time Display
B Start/Stop
C Switch over to service mode (press keys simultaneously)
for 5 seconds, only in default setting.
NOTE: Unlabeled controls and indicators are not operational.
30