Table of Contents
Advertisement
Dial a Number Directly
1.
Use the methods mentioned above to open dial screen
2.
Select the account to dial out on the left panel of the dial screen. The selected account will be
displayed in green
3.
Enter the digits to be dialed out using the keypad. If the digit matches call history, a list of numbers will
be displayed for users to select from.
4.
Tap on
(audio call only) or
the call will be automatically dialed out after 4 seconds timeout.
Note:
·
By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after entering a
number, the call will be automatically sent out after the timeout. The timeout interval can be configured
under web GUIàAccountàCall Settings.
·
ITX-3370 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUIàAccountàCall Settings.
·
When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the
contacts, entering 5 (JKL) 6 (MNO) 4 (GHI) 6 (MNO) will show call log with 5646 as the first four digits,
as well as John's number. Users could then directly select one of them from the list, instead of entering
all the digits.
Figure 37: Disable Video Call Feature on Dial Screen
(video call) to send the number. If no key is pressed, by default
ITX-3370 User Guide
Version 1.0.1.12
[Figure 36: ITX-3370 Dial Screen]
.
P a g e
| 47
Hide quick links:
Advertisement
Table of Contents
