Debug Dot1X - Cisco ME 3400 Command Reference Manual

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug dot1x

Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x feature. Use
the no form of this command to disable debugging.
Syntax Description
all
errors
events
packets
registry
state-machine
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command.
Related Commands Command
show debugging
show dot1x
OL-9640-10
debug dot1x {all | errors | events | packets | registry | state-machine}
no debug dot1x {all | errors | events | packets | registry | state-machine}
Display all IEEE 802.1x debug messages.
Display IEEE 802.1x error debug messages.
Display IEEE 802.1x event debug messages.
Display IEEE 802.1x packet debug messages.
Display IEEE 802.1x registry invocation debug messages.
Display state-machine related-events debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays IEEE 802.1x statistics, administrative status, and operational status
for the switch or for the specified port.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug dot1x
B-3