Vmps Server - Cisco ME 3400 Command Reference Manual

vmps server

vmps server
Use the vmps server global configuration command to configure the primary VLAN Membership Policy
Server (VMPS) and up to three secondary servers. Use the no form of this command to remove a VMPS
server.
Syntax Description
ipaddress
primary
Defaults
No primary or secondary VMPS servers are defined.
Command Modes Global configuration
Command History Release
12.2(25)EX
Usage Guidelines
The first server entered is automatically selected as the primary server whether or not primary is
entered. The first server address can be overridden by using primary in a subsequent command.
When using the no form without specifying the ipaddress, all configured servers are deleted. If you
delete all servers when dynamic-access ports are present, the switch cannot forward packets from new
sources on these ports because it cannot query the VMPS.
Examples
This example shows how to configure the server that has IP address 191.10.49.20 as the primary VMPS
server. The servers with IP addresses 191.10.49.21 and 191.10.49.22 are configured as secondary
servers:
Switch(config)# vmps server 191.10.49.20 primary
Switch(config)# vmps server 191.10.49.21
Switch(config)# vmps server 191.10.49.22
This example shows how to delete the server with IP address 191.10.49.21:
Switch(config)# no vmps server 191.10.49.21
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the VMPS Domain Server row.
Cisco ME 3400 Ethernet Access Switch Command Reference
2-728
vmps server ipaddress [primary]
no vmps server [ipaddress]
IP address or hostname of the primary or secondary VMPS servers. If you specify a
hostname, the Domain Name System (DNS) server must be configured.
(Optional) Decides whether primary or secondary VMPS servers are being
configured.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10