Cisco ME 3400 Command Reference Manual page 98

cpu traffic qos precedence
Interface:
switch(config)# interface g1/0/1
switch(config-if)# service-policy output output-policy
switch(config-if)# exit
Related Commands Command
class-map
cpu traffic qos cos
cpu traffic qos dscp
cpu traffic qos
qos-group
policy-map
show cpu traffic qos
show policy-map
show running-config
show table-map
table-map
Cisco ME 3400 Ethernet Access Switch Command Reference
2-70
Chapter 2
Description
Configures a class map to be used for matching packets to a specified criteria
and enters class-map configuration mode.
Configures class of service (CoS) marking for control plane traffic.
Configures quality of service (QoS) marking based on DSCP for control
plane traffic.
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services code
point (DSCP), or IP-precedence packet markings.
Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
Displays the QoS markings configured for CPU traffic.
Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.
Displays the configured class maps, policy maps, table maps, and aggregate
policers.
Displays information for all configured table maps or the specified table
map.
Configures quality of service (QoS) mapping and enters table-map
configuration mode.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10