Ethernet Lmi Ce-Vlan Map - Cisco ME 3400 Command Reference Manual

ethernet lmi ce-vlan map

ethernet lmi ce-vlan map
Use the ethernet lmi ce-vlan map Ethernet service configuration command to configure Ethernet Local
Management Interface (E-LMI) parameters. Use the no form of this command to remove the
configuration.
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description
vlan-id
any
default
untagged
Defaults No E-LMI mapping parameters are defined.
Command Modes Ethernet service configuration
Command History Release
12.2(25)SEG
Usage Guidelines Use this command to configure an E-LMI customer VLAN-to-EVC map for a particular user-network
interface (UNI).
E-LMI mapping parameters are related to the bundling characteristics set by entering the ethernet uni
{bundle [all-to-one] | multiplex} interface configuration command.
•
•
•
•
Cisco ME 3400 Ethernet Access Switch Command Reference
2-116
ethernet lmi ce-vlan map {vlan-id | any | default | untagged}
no ethernet lmi ce-vlan map {vlan-id | any | default | untagged}
Enter the customer VLAN ID or VLAN IDs to map to. You can enter a single
VLAN ID (the range is 1 to 4094), a range of VLAN IDs separated by a
hyphen, or a series of VLAN IDs separated by commas.
Map all VLANs (untagged and VLANs 1 to 4094).
Map to the default service instance. You can use the default keyword only
if you have already mapped the service instance to a VLAN or a group of
VLANs.
Map only untagged VLANs.
Modification
This command was introduced.
Using the default UNI attribute (bundling and multiplexing) supports multiple EVCs and multiple
VLANs.
Entering the ethernet uni bundle command supports only one EVC with one or more VLANs.
Entering the ethernet uni bundle all-to-one command supports multiple VLANs but only one EVC.
If you use the ethernet lmi ce-vlan map any Ethernet service configuration command, you must
first configure all-to-one bundling on the interface.
Entering the ethernet uni multiplex command supports multiple EVCs with only one VLAN per
EVC.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10