Cisco ME 3400 Command Reference Manual page 583

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This is an example of output from the show policy-map interface command for an interface with a
two-level output policy map applied:
Switch> show policy-map interface fastethernet0/3
FastEthernet0/3
Service-policy output: top2
Class-map: class-default (match-any)
OL-9640-10
209871 packets
Match: any
56 packets
Traffic Shaping
Average Rate Traffic Shaping
CIR 11111124 (bps)
Output Queue:
Tail Packets Drop: 195421
Service-policy : pout
Class-map: ip1 (match-all)
9309 packets
Match: ip precedence 1
Priority
police cir 20000000 bc 625000
conform-action transmit
exceed-action drop
conform: 4916 (packets) exceed: 4393 (packets)
Queue Limit
queue-limit 250 (packets)
queue-limit precedence
Output Queue:
Max Tail Drop Threshold: 250
Tail Packets Drop: 4393
Class-map: ip2 (match-all)
0 packets
Match: ip precedence 2
Traffic Shaping
Average Rate Traffic Shaping
CIR 5% 555555 (bps)
Output Queue:
Max Tail Drop Threshold: 48
Tail Packets Drop: 0
Class-map: ip3 (match-all)
0 packets
Match: ip precedence 3
Bandwidth percent 10
Queue Limit
queue-limit 200 (packets)
queue-limit precedence
Output Queue:
Max Tail Drop Threshold: 200
Tail Packets Drop: 0
Class-map: class-default (match-any)
200562 packets
Match: any
56 packets
Output Queue:
Tail Packets Drop: 191028
1 100 (packets)
1111110 (bps)
3 100 (packets)
Cisco ME 3400 Ethernet Access Switch Command Reference
show policy-map
2-555