Cisco ME 3400 Command Reference Manual page 249

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples This example shows how to configure the global robustness variable so that the switch sends out three
queries before it deletes a listener port that does not respond:
Switch(config)# ipv6 mld snooping robustness-variable 3
This example shows how to configure the robustness variable for VLAN 1. This value overrides the
global configuration for the VLAN:
Switch(config)# ipv6 mld snooping vlan 1 robustness-variable 1
You can verify your settings by entering the show ipv6 MLD snooping [vlan vlan-id] user EXEC
command.
Related Commands Command
ipv6 mld snooping last-listener-query-count
sdm prefer
show ipv6 mld snooping
OL-9640-10
Description
Sets IPv6 MLD snooping last-listener query count.
Configures an SDM template to optimize system
resources based on how the switch is being used.
Displays MLD snooping configuration.
Cisco ME 3400 Ethernet Access Switch Command Reference
ipv6 mld snooping robustness-variable
2-221