Cisco ME 3400 Command Reference Manual page 30

aaa accounting dot1x
radius
tacacs+
Defaults AAA accounting is disabled.
Command Modes Global configuration
Command History Release
12.2(25)EX
Usage Guidelines This command requires access to a RADIUS server.
We recommend that you enter the dot1x reauthentication interface configuration command before
Note
configuring IEEE 802.1x RADIUS accounting on an interface.
Examples
This example shows how to configure IEEE 802.1x accounting:
Switch(config)# aaa accounting dot1x
Switch(config)# aaa accounting dot1x default start-stop group radius
Switch(config)#
Note The RADIUS authentication server must be properly configured to accept and log update or watchdog
packets from the AAA client.
Related Commands Command
aaa authentication
dot1x
aaa-new-model
dot1x reauthentication
dot1x timeout
period
Cisco ME 3400 Ethernet Access Switch Command Reference
2-2
(Optional) Enable RADIUS authorization.
(Optional) Enable TACACS+ accounting.
Modification
This command was introduced.
Description
Specifies one or more AAA methods for use on interfaces running
IEEE 802.1x.
Enables the AAA access control model. For syntax information, see the
Cisco IOS Security Command Reference, Release 12.2>
Authentication, Authorization, and Accounting > Authentication
Commands.
Enables or disables periodic re-authentication.
reauth Sets the number of seconds between re-authentication attempts.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10