Debug Sw-Vlan Notification - Cisco ME 3400 Command Reference Manual

debug sw-vlan notification

debug sw-vlan notification
Use the debug sw-vlan notification privileged EXEC command to enable debugging of the activation
and deactivation of VLAN IDs. Use the no form of this command to disable debugging.
Syntax Description accfwdchange
allowedvlancfgchange
fwdchange
linkchange
modechange
statechange
Note Though visible in the command-line help strings, the pruningcfgchange keyword is not supported.
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines
The undebug sw-vlan notification command is the same as the no debug sw-vlan notification
command.
Cisco ME 3400 Ethernet Access Switch Command Reference
B-92
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange |
linkchange | modechange | statechange}
Display debug messages for VLAN manager notification of aggregated
access interface spanning-tree forward changes.
Display debug messages for VLAN manager notification of changes to the
allowed VLAN configuration.
Display debug messages for VLAN manager notification of spanning-tree
forwarding changes.
Display debug messages for VLAN manager notification of interface
link-state changes.
Display debug messages for VLAN manager notification of interface mode
changes.
Display debug messages for VLAN manager notification of interface state
changes.
Modification
This command was introduced.
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
OL-9640-10