Clear Lacp - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

clear lacp

Use the clear lacp privileged EXEC command to clear Link Aggregation Control Protocol (LACP)
channel-group counters.
Note LACP is available only on network node interfaces (NNIs) and enhanced network interfaces (ENIs).
Syntax Description channel-group-number
counters
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines You can clear all counters by using the clear lacp counters command, or you can clear only the counters
for the specified channel group by using the clear lacp channel-group-number counters command.
Examples This example shows how to clear all channel-group information:
Switch# clear lacp counters
This example shows how to clear LACP traffic counters for group 4:
Switch# clear lacp 4 counters
You can verify that the information was deleted by entering the show lacp counters or the show lacp 4
counters privileged EXEC command.
Related Commands Command
show lacp
OL-9640-10
clear lacp {channel-group-number counters | counters}
(Optional) Channel group number. The range is 1 to 48.
Clear traffic counters.
Modification
This command was introduced.
Description
Displays LACP channel-group information.
Cisco ME 3400 Ethernet Access Switch Command Reference
clear lacp
2-45