Debug Dot1X - Cisco Catalyst 2950 Command Reference Manual

debug dot1x

debug dot1x
Use the debug dot1x privileged EXEC command to enable debugging of the 802.1X feature. Use the no
form of this command to disable debugging output.
Syntax Description
all
authsm
backend
besm
core
reauthsm
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(6)EA2
Usage Guidelines
The undebug dot1x command is the same as the no debug dot1x command.
Related Commands Command
show debugging
show dot1x
Catalyst 2950 Desktop Switch Command Reference
A-2
debug dot1x {all | authsm | backend | besm | core | reauthsm}
no debug dot1x {all | authsm | backend | besm | core | reauthsm}
Enable debugging of all conditions.
Enable debugging of the authenticator state machine, which is responsible for
controlling access to the network through 802.1X-enabled ports.
Enable debugging of the interaction between the 802.1X process and the switch
(Remote Authentication Dial-In User Service [RADIUS] client).
Enable debugging of the backend state machine, which is responsible for
relaying authentication request between the client and the authentication
server.
Enable debugging of the 802.1X process, which includes 802.1X initialization,
configuration, and the interaction with the port manager module.
Enable debugging of the re-authentication state machine, which manages
periodic re-authentication of the client.
Modification
This command was first introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, refer to Cisco IOS Configuration Fundamentals
Command Reference For IOS Release 12.1 > Cisco IOS System
Management Commands > Troubleshooting Commands.
Displays 802.1X statistics, administrative status, and operational status for
the switch or for the specified interface.
Appendix A Debug Commands
78-11381-05