Debug Dot1X - Cisco Catalyst 2960 Command Reference Manual

Appendix B Catalyst 2960 Switch Debug Commands

debug dot1x

Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication
feature. Use the no form of this command to disable debugging.
Syntax Description all
errors
events
feature
packets
registry
state-machine
Though visible in the command-line help strings, the redundancy keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)FX
12.2(25)SEE
Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command.
OL-8604-03
debug dot1x {all | errors | events | feature | packets | registry | state-machine}
no debug dot1x {all | errors | events | feature | packets | registry | state-machine}
Display all IEEE 802.1x authentication debug messages.
Display IEEE 802.1x error debug messages.
Display IEEE 802.1x event debug messages.
Display IEEE 802.1x feature debug messages.
Display IEEE 802.1x packet debug messages.
Display IEEE 802.1x registry invocation debug messages.
Display state-machine related-events debug messages.
Modification
This command was introduced.
The feature keyword was added.
Catalyst 2960 Switch Command Reference
debug dot1x
B-7