Cisco ME 3400 Command Reference Manual page 593

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This example shows output from the show rep topology segment archive command:
Switch# show rep topology segment 1 archive
REP Segment 1
BridgeName
---------------- ---------- ---- ----
sw1_multseg_3750 Gi1/1/1
sw3_multseg_3400 Gi0/13
sw3_multseg_3400 Gi0/14
sw4_multseg_3400 Gi0/13
sw4_multseg_3400 Gi0/14
sw5_multseg_3400 Gi0/13
sw5_multseg_3400 Gi0/14
sw2_multseg_3750 Gi1/1/2
sw2_multseg_3750 Gi1/1/1
sw1_multseg_3750 Gi1/1/2
Related Commands Command
rep segment
OL-9640-10
PortName Edge Role
Pri Open
Open
Open
Open
Open
Open
Open
Alt
Open
Sec Open
Description
Enables REP on an interface and assigns a segment ID. This command is also
used to configure a port as an edge port, a primary edge port, or a preferred
port.
Cisco ME 3400 Ethernet Access Switch Command Reference
show rep topology
2-565