Debug Platform Ipc - Cisco ME 3400 Command Reference Manual

debug platform ipc

debug platform ipc
Use the debug platform ipc privileged EXEC command to enable debugging of the platform-dependent
Interprocess Communication (IPC) Protocol. Use the no form of this command to disable debugging.
This command is available only when the switch is running the metro access or metro IP access image.
Syntax Description all
init
receive
send
trace
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines The undebug platform ipc command is the same as the no debug platform ipc.
Related Commands Command
show debugging
Cisco ME 3400 Ethernet Access Switch Command Reference
B-54
debug platform ipc {all | init | receive | send | trace}
no debug platform {all | init | receive | send | trace}
Display all platform IPC debug messages.
Using this command can degrade the performance of the switch.
Note
Display debug messages related to IPC initialization.
Display IPC traces each time an IPC packet is received by the switch.
Display IPC traces each time an IPC packet is sent by the switch.
Display IPC trace debug messages, tracing the code path as the IPC functions are
executed.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
OL-9640-10