Cisco ME 3400 Command Reference Manual page 376

remote-span
Examples This example shows how to configure a VLAN as an RSPAN VLAN.
Switch(config)# vlan 901
Switch(config-vlan)# remote-span
This example shows how to remove the RSPAN feature from a VLAN.
Switch(config)# vlan 901
Switch(config-vlan)# no remote-span
You can verify your settings by entering the show vlan remote-span user EXEC command.
Related Commands Command
monitor session
vlan
Cisco ME 3400 Ethernet Access Switch Command Reference
2-348
Chapter 2
Description
Enables Switched Port Analyzer (SPAN) and RSPAN monitoring on a port
and configures a port as a source or destination port.
Changes to config-vlan mode where you can configure VLANs 1 to 4094.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10