Cisco ME 3400 Command Reference Manual page 617

Ethernet access switch

Hide thumbs Also See for ME 3400:

Table of Contents

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

This is an example of output from the show vlan internal usage command. It shows that VLANs 1025

and 1026 are being used as internal VLANs for Fast Ethernet routed ports 23 and 24. If you want to use

one of these VLAN IDs, you must first shut down the routed port, which releases the internal VLAN,

and then create the extended-range VLAN. When you start up the routed port, another internal VLAN

number is assigned to it.

Switch> show vlan internal usage

---- -------------

1025 FastEthernet0/23

1026 FastEthernet0/24

Related Commands

private-vlan

switchport mode

Configures a VLAN as a community, isolated, or primary VLAN or

associates a primary VLAN with secondary VLANs.

Configures the VLAN membership mode of a port.

Enables VLAN configuration mode where you can configure VLANs 1 to

Cisco ME 3400 Ethernet Access Switch Command Reference