Debug Platform Ip Source-Guard - Cisco ME 3400 Command Reference Manual

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug platform ip source-guard

Use the debug platform ip source-guard privileged EXEC command to debug IP source guard events.
Use the no form of this command to disable debugging.
Syntax Description
all
error
event
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(50)SE
Usage Guidelines The undebug platform ip source-guard command is the same as the no debug platform ip
source-guard command.
Related Commands Command
show ip verify source
show debugging
OL-9640-10
debug platform ip source-guard {all | error | event}
no debug platform ip source-guard {all | error | event}
Display all IP source-guard platform debug messages.
Display IP source-guard platform error debug messages.
Display IP source-guard platform event debug messages.
Modification
This command was introduced.
Description
Displays the IP source guard configuration.
Displays information about the types of debugging that are enabled.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug platform ip source-guard
B-51