Table of Contents
Advertisement
Configure Ringer Rhythm for internal Calls
b
7 Q
your telephone
public password
Change Ringer Rhythm for external Calls
b 7 O
secret password
The default is 1 x long for each existing telephone number.
Listen to Ringer Rhythms for internal, external and Alarm Calls
b 7 Q 99
analog
public
telephone
password
As ISDN telephones most often support their own ringer melo-
dies only and not the melodies of the PBX, you may listen with
analog telephones only.
Make a Call without any Dialling Operation (Automatic Dialling / Hot Line)
With the automatic dialling function you can configure your telephone to
dial automatically an internal or external number. This will start 2 sec-
onds after taking the receiver off-hook. It is not necessary to press any
key. If you start to dial before these 2 seconds have elapsed, this has
priority. Please pay attention to the fact that some telephones do not dial
immediately after pressing the key (sometimes delayed by
In this case, you have to start dialling in time!
97
0 #
1 x long
1
or
3 x short
98 M
Number or. MSN/DDI of your exchange line
(without area code)
0
1 x long
1
or
3 x short
Ü
or
special rhythms No. 1-6
(for external calls only)
8
or
alarm call
1
/
second).
2
* 0 #
or
or
# a c
Telephone is ringing in the selected rhythm
(60 seconds or until receiver is taken off-hook)
Change to ringer rhythm 1 x long
Change to ringer rhythm 3 x short
Set ringer rhythm „1 x long"
1
Set ringer rhythm
Ü
Set special rhythms No. 1-6
rhythm 3 x short
Listen to special
39
Settings
„3 x short"
Listen to ringer
rhythm 1 x long
Listen to ringer
rhythm 1...6
Listen to alarm
call
Advertisement
Table of Contents
