Record The Alarm Announcement By Telephone And Listen To It (Compact 4410 Usb And Commander Basic Only); You Like To Set Date And Time; You Like To Park Calls With A Parking Code; Set Code Digits - Auerswald COMpact 2206 USB Operator's Manual

Record the Alarm Announcement by Telephone and listen to it (COMpact 4410 USB and COMmander Basic only)

b 7 O 442 # f
secret
password
b 7 O 466 # f
secret
password
With the recording function any existing announcement will be
deleted unconditional. Even if you hang-up after dialling
442#
, the old announcement will already be deleted. The announce-
ment may have a maximum length of 16 seconds (COMmander Basic:
15 seconds). After this period the recording will be stopped automati-
cally and you will hear the acknowledgement tone. If you are using a
shorter announcement, you can stop the recording unconditional by
#
hang-up or pressing the key.
The announcement is directly recorded from the receiver of an internal
telephone. You have the alternative option to store the alarm announce-
ment as .wav file with the PC software COMtools.
For the functions Wake-up and configuration switching your PBX needs
the correct time. After a power failure the time information is lost. In this
case automatic switching and the Wake-up function will not be per-
formed. After adjusting the time by this programming sequence or by an
b 7 O
secret password
b 7 O
secret password
You like to park an external call on a Point-to-Multipoint connection
(external S port) and retrieve that call with an ISDN device connected
0
at the same bus (or vice versa), you will need a code number (see

Set Code Digits

b 7 O
secret password
b 7 O
secret password
you hear the
acknowledgement tone
#
you hear the
stop
announcement

You like to set Date and Time

750 U
4-digits time:
00-23 (hours) and 00-59 (minutes)
751
D
6-digits date:
01-31 (day), 01-12 (month), 00-99 (year)

You like to park Calls with a Parking Code

chap-
88 C #
2 code digits
88 00 #
* g #
start Record the stop
recording announcement. recording
The alarm announcement may have the following content:
Name and address of the PBX location;
Reason of the alarm trigger;
Information about alarm acknowledgement (Dialling of the digit
60 seconds with a DTMF telephone or a DTMF sender).
COMpact 4410 USB: If you have also stored a recorded Music on Hold
in the PBX, its playing time will be shortened by recording an announce-
ment. (see chapter Recording internal Music on Hold with the PBX
(COMpact 4410 USB and COMmander Basic only) on page
For the PBX COMpact 2206 USB no alarm announcement is possible.
In case of an alarm call you will hear a signal tone instead.
outbound external call (may be deactivated) the functions will be active
again (you can configure in COMset an automatic call to a number e.g.
your own number for this purpose).
#
#
ter Parking external Call on the external S
Connection only) on page
calls always with a park code from within the PBX.
Settings
Record alarm announcement
Listen to the stored alarm announcement
Port (For Point-to-Multipoint
0
16). With this programming you can park
Enter Code Digits
Delete Code Digits
47
and store it
0
within
44).
Set time
Set date