Auerswald COMpact 2206 USB Operator's Manual page 69

Isdn pbx system
Hide thumbs Also See for COMpact 2206 USB:
Table of Contents

Advertisement

#
12 1n *n
12 1 *n #
12 0 *n #
20 n #
... and immediately switch off all active Subscriber
a) Please use in the digit sequences 13 instead of 12 for „CF on busy" or 14 instead of 12 for „CF
on no reply".
Call Forwarding (Group) -> page 52
7Q121n*G#
7 Q 12 1 *G #
7 Q 12 0 *G #
7 Q20 G #
M f7 W f
121n*G#
12 1 *G #
12 0 *G #
20 G #
a) Please use in the digit sequences 13 instead of 12 for „CF on busy" or 14 instead of 12 for „CF
on no reply".
Call Forwarding (MSN/DDI) -> page 28
7Q1210r**M#
7 Q 12 1 **M #
7 Q 12 0 **M #
7 Q10 M #
M f7 W f
1210r**M#
a)
... and immediately
switch on Subscriber Call
Forwarding with entry of an internal telephone
number as target.
a)
... and immediately
switch on Subscriber Call
Forwarding without telephone number entry
because it has already been saved.
... and switch off Subscriber Call Forwarding
immediately
Call Forwardings on the phone.
a)
Immediately
switch on Group Call
Forwarding with entry of internal telephone
number as target.
a)
Immediately
switch on Group Call
Forwarding without entry of telephone
number because it has already been saved.
a)
Immediately
switch off Group Call
Forwarding.
Switch off all Group Forwarding Calls valid
for one group.
Start programming via an external
telephone... .
a)
Immediately
switch on Group Call
Forwarding with entry of an internal
telephone number as target.
a)
Immediately
switch on Group Call For-
warding without entry of telephone number
because it has already been saved.
a)
Immediately
switch off Group Call
Forwarding.
Switch off all active Group Call Forwardings
for one group.
a)
Immediately
switch on MSN/DDI Call
Forwarding with entry of an external
telephone number (with Exchange
Line Access Number) as target.
a)
Immediately
switch on MSN/DDI Call
Forwarding without entry of telephone
number because it has already been
a)
Immediately
switch off MSN/DDI Call
Forwarding.
Switch off all Call Forwardings being
active for these MSN/DDI.
Start programming via an external
telephone ...
a)
... and immediately
switch on MSN/
DDI-Call Forwarding with entry of exter-
nal telephone number (with Exchange
Line Access Number) as destination.
12 1 **M #
12 0 **M #
10 M #
a)
.
a) Please use in the digit sequences 13 instead of 12 for „CF on busy" or 14 instead of 12 for „CF
on no reply".
7 Q 11 S #
Configurations (Day, Night etc.) -> page 23
7 Q 89 o #
7 Q 89 0 #
7 Q 89 9 #
7 Q 81 o #
7 Q 82 # f
7 O 80 S #
7Q26S#
7Q34S#
7Q35S#
7 O 84 K k #
7 O 85 K S #
7 O 06 # f f a
saved.
c b f a
7 Q 56 # f
7 Q 55 FF #
7Q40S#
Digit Code Index
... and immediately
DDI Call Forwarding without entry of
telephone number because it has
... and immediately
... and switch off all active Call Forward-
Call Waiting -> page 24
Knocking (Call Waiting) is permitted or
Next setting will be valid for configuration
Next setting will be valid for all
Next setting will be valid for current
Set configuration 1...6 manually.
Enquire active configuration.
Switch on or off the time controlled
switching of the configurations.
Do-not-disturb -> page 30
Switch on or off Do-not-disturb.
De/Activate Robinson list.
Door Terminal Call -> page 41
Enter external telephone number as
destination of the Door Terminal Call.
Switch on or off External Door Terminal Call.
Firmware Update -> page 62
Then wait for acknowledgement
Request Firmware Version
Flash-Time -> page 63
Groups -> ab page 52
Login as inbound and outbound /
69
a)
switch on MSN/
already been saved.
a)
switch off MSN/
DDI Call Forwarding.
ings this MSN/DDI.
forbidden.
1...6.
configurations.
configuration.
De/Activate VIP list.
Start Update
tone
Learn Flash-time
As a Group Member –
logout from Group.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compact 4410 usbCommander basic

Table of Contents

Save PDF