Aux1 Adjustable Rate Control; Aux2 Adjustable Rate Control - Sanwa MT-44 Manual

AUX1 Adjustable Rate Control

[AUX1]
●You can change the AUX1 performance feature from Mild to Linear and to Quick.
You can set the High side and the Low side separately.
*When setting AUX1 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX1 with the Select button and set
CURVE TYPE of AUX1 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range: -100%～100%
0%
○Default:
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○Setting range: 5%～95%
0%
○Default:
*When cancelling a selected feature, use the Back button.

AUX2 Adjustable Rate Control

[AUX2]
●You can change the operation feature of AUX2 from Mild to Linear and to Quick.
You can set the High side and the Low side separately.
*When setting AUX2 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX2 with the Select button and set
CURVE TYPE of AUX2 to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range: -100%～100%
0%
○Default:
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○Setting range: 5%～95%
0%
○Default:
*When cancelling a selected feature, use the Back button.
Point Setting Position
Point Setting Position
２４