Quick Setup; Setting Up Type - Sanwa MT-44 Manual

Usage of each feature
● Quick Setup
1) Turn the power switch on while doing Enter operation
Push
Holding
2) Quick Setup screen is displayed.
As you do Enter operation, Quick Setup Wizard is
launched.
3) When the screen is changed to Model selection screen,
select a Model to set up by using Multi-Selector.
When a Model to set is selected, set with Enter operation.
4) When the screen is changed to Car Type selection
screen, select a Car Type using Multi-Selector.
When a Car Type is selected, set with Enter operation.

Setting up Type

○ Setting range: EP CAR STANDARD
○ Default:
*Channel operation of each type will be as follows.
Channel operation specifications for each Type
TYPE EP CAR EP CAR
CH
STANDARD (LED UNIT)
CH1 STEERING STEERING STEERING STEERING STEEIRING
CH2
ESC
AUX1 LED-ST
CH3
CH4 AUX2 LED-TH
*Select a type to be used according to an RC.
１７
About Short Cut Menu
Quick Setup <QUICK SETUP WIZARD>
⇒
EP CAR (LED UNIT)
EP CAR (SVZ)
EP CAR (SVD)
GP CAR STANDARD
1/5 GP CAR DUAL BR1
1/5 GP CAR DUAL BR2
CRAWLER 4WS/MOA
EP CAR STANDARD
EP CAR EP CAR GP CAR
(SVZ) (SVD) STANDARD
STEERING
THROTTLE THROTTLE
ESC ESC ESC
/BRAKE
STEERING
CODE1 CODE1 AUX1
CODE2 CODE2 AUX2
Power Switch
ON
1/5 GP 1/5 GP CRAWLER
DUAL BR1 DUAL BR2 4WS/MOA
STEERING
STEERING
1 F
ESC
THROTTLE
/BRAKE R F
BRAKE
STEERING
R
2 R
BRAKE ESC
BRAKE F
F R
ENTER BACK
ENTER BACK
ENTER BACK
ENTER BACK