Table of Contents
Advertisement
Usage of each feature
CURVE
[ST] Steering Adjustable Rate Control
● You can change the steering feature from Mild to Linear and to Quick. In general, if you find your RC car
oversteering, change the setting to the minus side and if you find understeering, change to the plus side.
Steering Adjustable Rate Control is a simultaneous setting for L and R.
1) Select ST with the Select button and set CURVE TYPE of ST to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and
adjust the setting value.
○Setting range: －100%～100%
○Default:
3) Setting Point [POINT]
Select [POINT] with the multi-selector and
adjust the setting value.
○Setting range: 5%～95%
○Default:
* When cancelling a selected feature, use the Back button.
[TH] Throttle Adjustable Rate Control
● You can change the throttle feature from Mild to Linear and to Quick. In general, when operating
on a slippery road or if you find over powering, change the setting to the minus side and when
operating on a high-grip road or if you find lack of power in the power unit, change to the plus side.
You can set the High side and the brake side separately.
*Selection of the High side and the brake side is done by trigger operation.
1) Select TH with the Select button and set
CURVE TYPE of TH to [ARC] with the multi-selector.
2) Setting Rate [RATE]
Select [RATE] with the multi-selector and adjust
the setting value.
○Setting range: -100%～100%
○Default:
3) Setting Point [POINT]
Select [POINT] with the multi-selector and adjust the setting value.
○Setting range: 5%～95%
○Default
* When cancelling a selected feature, use the Back button.
２３
0%
0%
0％
50%
SETTING
Steering Operation Position
Select H/B by trigger operation.
Point Setting Position
Advertisement
Table of Contents
