Aux Type - Sanwa MT-44 Manual

AUX TYPE

●A feature to set the performance of AUX1 and AUX2 (3ch and 4ch).
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [AUX TYPE] with the multi-selector and
determine with the Enter operation.
3)Set AUX TYPE with the multi-selector.
○ Setting Items:
TYPE
STEP 1/2/5/10/20/25/50/100
POINT 2/3/4/5/6
4WS 2mode/3mode/4mode
MOA 1/2/5/10/20/25/50/100
AUX MIX ST-mix/TH-mix
CODE5 USER/SVZ/SVD
CODE10 USER/SV-STK
○ Default : AUX1: STEP MODE: 5
AUX2: STEP MODE: 5
*Action image of 4WS Mode setting
2mode 3mode
F-ST
REV
(Opposite
Phase)
*For ST-mix, mixing is in effect from Steering onto AUX; for TH-mix, from Throttle onto AUX.
*When setting AUX TYPE to CODE, change of setting of the compatible equipment can be done
from the transmitter.
Compatible equipment includes speed controllers like SUPER VORTEX ZERO and
SV PLUS ZERO, and SGS-01C/ SGS-01D.
*When AUX TYPE is set to CODE, do not connect any equipment that are not compatible to AUX1
and AUX2 (3ch and 4ch) of the receiver. If you connect equipment that is not compatible,
the connected equipment will be failed.
*For POINT AUX, see P. 33, for CODE AUX, see P.36.
*CODE10 is a compatible feature to SUPER VORTEX Gen2/STOCK.
*When setting MODE to USER with CODE5/CODE10, you can freely register names of each item.
MODE
4mode
F-ST F-ST
REV REV
(Opposite
(Opposite
Phase)
Phase)
NOR
NOR
(Coodinated
(Coodinated
Phase)
Phase)
R-ST
ENTER
ENTER
Switching Type MODE Setting
BACK
BACK
５４