Table of Contents
Advertisement
CONVERT
●A feature to convert Trim that has been adjusted in each channel to Sub Trim and EPA and to correct Trim
to center. Depending on a setting, there is a case you cannot convert.
1) Select a channel (ST/TH/AUX1/AUX2) to convert with
the Select button.
2) Once a channel to set is determined, launch the convert
feature with Enter operation.
3) For example, if the converting feature is used when Steering
Trim is [L20] and each [EPA] is 100%, the flow will be as shown
in right illustration. Trim will be centered [0] and the portion
of the Trim movement will be converted to Sub Trim and EPA.
*Conversion can be set in each channel.
ENTER
ENTER
Conversion is completed.
BACK
３０
Advertisement
Table of Contents
