Table of Contents
Advertisement
[TH] Throttle Exponential
● You can change the throttle feature from Mild to Linear and to Quick. In general, when operating
on a slippery road or if you find over powering, change the setting to the minus side and when
operating on a high-grip road or if you find lack of power i n the power unit, change to the plus side.
You can set the High side and the brake side separately.
*Selection of the High side and the brake side is done
by trigger operation.
1) Select TH with the Select button and set
CURVE TYPE of TH to [EXP] with the multi-selector.
2) Adjust the setting value with the multi-selector.
○Setting range: -100%～100%
0%
○Default:
AUX1 • Exponential
[AUX1]
●You can change the operation feature of AUX1 from Mild to Linear to Quick.
You can set the High end and the Low end separately.
*When setting AUX1 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX1 with the Select button and
set CURVE TYPE of AUX1 to [EXP] with the
multi-selector.
2) Adjust the setting value with the multi-selector.
○Setting range: -100%～100%
0%
○Default:
AUX2 • Exponential
[AUX2]
●You can change the operation feature of AUX2 from Mild to Linear and to Quick.
You can set the High end and the Low end separately.
*When setting AUX2 to [CODE5/CODE10] in AUX TYPE,
changing the setting does not affect the performance.
1) Select AUX2 with the Select button and set
CURVE TYPE of AUX2 to [EXP] with the multi-selector.
2) Adjust the setting value with the multi-selector.
○Setting range: -100%～100%
0%
○Default:
Select H/B by trigger operation.
Throttle Operation Position
２２
Advertisement
Table of Contents
