Table of Contents
Advertisement
SPEED
● Features to control the speed of the servos used for steering and throttle. By setting, the RC car is not affected even
when doing a sudden operation. On the steering side, smooth corner work becomes possible and on the throttle side,
stable rising from a corner by throttle work with saved power.
* When setting AUX TYPE to [CODE5/CODE10], adjusting the speed feature of the AUX channel does not affect the performance.
* When setting the speed of the AUX channel, do so using steering/throttle as a reference.
[ST] Steering Speed
●A feature to delay the speed of the steering servos against the steering operation. You can set speed for steering
forward and returning individually. For steering operation slower than setting, the speed feature does not work.
1) Select [ST (Steering)] with Up key/Down key.
2) Setting on the forward side [FORWARD]
Select [FORWARD] with the Enter key and adjust the
setting value with Up key/Down key.
*When cancelling a selected feature, use the Back key.
○ Setting range:
0～-100
○ Default:
0
3) Setting on the Return side (RETURN]
Select [RETURN] with the Enter key and adjust the setting value with Up
○ Setting range: 0～-100
○ Default: 0
*Adjust during actual operation. When not using the features or when a setting value cannot be determined even after
adjustment, set the value to 0% (linear).
Supplement
●When steering speed and steering curve are combined, the effect is doubled.
[TH] Throttle Speed
● A feature to slow down the performance speed of the throttle se rvos and delay the response of the speed controller against thr ottle
operation. You can set speed for entering throttle (Forward) and returning (Return) individually. The speed feature does not work with
throttle operation slower than the setting. *Setting is only for High side and Brake side cannot be set.
1) Select [TH (Throttle)] with Up key/Down key.
2) Setting on the forward side [FORWARD]
Select [FORWARD] with the Enter key and adjust the
setting value with Up key/Down key.
*When cancelling a selected feature, use the Back key.
○ Setting range: 0～-100
○ Default:
0
3) Setting on the Return side (RETURN)
Select [RETURN] with the Enter key and adjust the setting
value with Up key/Down key.
○ Setting range: 0～-100
○ Default:
0
*Adjust during actual operation. When not using the features or when a setting value cannot be determined
even after adjustment, set the value to 0% (linear).
● For driving an RC car, throttle operation that suits the movement of the RC car is important and excessive operation
Supplement
● When throttle speed and throttle curve are combined, the effect is doubled.
●For driving an RC car, steering operation that suits the movement of the RC car is important and excessive operation
is not recommended. Steering speed can minimize unnecessary operation and enables smooth cornering.
is not recommended. Throttle speed can minimize unnecessary operation and enables smooth performance.
SETTING
FORWARD
RETURN
Ｎ
Ｌ
End
Neutral
Choose [ST] by selector button.
key/Down key.
FORWARD
RETURN
Ｈ
End
Neutral
FORWARD
RETURN
Ｒ
End
Ｎ
Choose [TH] by selector button.
２０
Advertisement
Table of Contents
