Table of Contents
Advertisement
Usage of each feature
Interval Timer [INT TIMER]
●It activates the alarm at the time set at the beginning of
running and uses it as the guideline for the goal time.
1) Select [TIMER] with the multi-selector and determine with the
Enter operation.
2) Setting the Type [TYPE]
Operate the Select button and select [INT] with [TYPE].
3) Setting Interval (INTERVAL)
Set the Interval Timer with [INTERVAL].
4) Starting Interval Timer
As a default, the timer switch is set to SW1.
When holing SW1, the timer will be in the standby mode and
measuring will start when you press SW1 again or operate the
trigger.
5) Every time you operate SW1, the Interval Timer will be reset .
6) Completing measuring
By holding SW1, measuring will be completed.
*When turning the power switch off while the timer is activated,
the timer will be reset.
*When the timer is set to SW1/SW2, the timer will be in the standby
mode by holding the switch even on a screen other than the
setting screen.
DOWN TIMER
● It can be a guideline for calculating running time of an electric
RC car and the fuel cost of an engine RC car.
● You can set for per second up to 99 : 59.
● When the timer switches to the Up Timer after the Down Timer
ends, you can check the lap time after the end.
1) Select [TIMER] with the multi-selector and determine with the
Enter operation.
2) Setting the Type [TYPE]
Operate the Select button and select [DOWN] with [TYPE].
* Set the Down Timer with [GOAL-TIME] of SETUP.
3) Starting Down Timer
As a default, the timer switch is set to SW1.
When holing SW1, the timer will be in the standby mode and
measuring will start when you press SW1 again or operate the
throttle trigger.
4) Every time you operate SW1, the Down Timer will be reset.
5) Completing measuring
By holding SW1, measuring will be completed.
*When turning the power switch off while the timer is activated, the timer will be reset.
*When the timer is set to SW1, the timer will be in the standby mode by holding the switch
even on a screen other than the setting screen.
３９
TIMER
ENTER
BACK
SWITCH 1
TIMER
ENTER
BACK
Advertisement
Table of Contents
