Offset; Throttle Type[Th Type] - Sanwa MT-44 Manual

OFFSET

● By moving the position of the throttle neutral at the time of starting an engine RC car engine,
it improves the start-up performance of the engine.
● You can fix at a position where idling speed is increased so that the engine will not stop during refueling your engine RC car.
● By operating the switch that has been set, you can stop the engine of your RC boat.
● You can use various power sources with Offset feature.
● ON/OFF of the Offset feature is not assigned to the switch and keys at the factory.
When using, assign the features with key assignment (P. 51, 52)
1) Select the throttle function with the multi-selector and
determine with the Enter operation.
2) Select [OFFSET] with the multi-selector and determine with Enter.
It will change to OFFSET Setting menu.
3) Setting Offset [OFFSET]
Set ON/OFF of the Offset feature with the multi-selector.
○Setting range: ON/OFF
OFF
○Default:
4) Setting Type [TYPE]
Set Type of the Offset with the multi-selector.
○Setting range: I-UP (Idle Up)/N-BR (Neutral Brake)
○Default: I-UP
5) Setting Point [POINT]
Set Point of the Offset with the multi-selector.
○Setting range: H100%～B100%
0％
○Default:
6) Setting Beep [BEEP]
Set Alarm (Beep) that goes off when the Offset is activated.
○Setting range: ON/OFF
○Default: OFF
* When the Offset feature is working, X illumination and Function
LED flash.

THROTTLE TYPE[TH TYPE]

●You can move the neutrals position of the throttle and set the operating ratio of the forward side and the brake
(backward) side to either 7:3 or 5:5.
*Set the throttle type according to the speed controller to be used.
1) Select the throttle function with the multi-selector and determine
with the Enter operation.
2) Select [TH TYPE] with the multi-selector and determine with Enter.
3) Setting the Throttle Type
Set the Throttle Type with the multi-selector.
○Setting range: F7:B3 / F5:B5
F7:B3
○Default:
*When changing TH TYPE, the screen changes to the confirmation
screen and a message is displayed. Operate following the message.
THROTTLE FUNCTION/TH-FUNCTION
OFFSET Position
When setting plus
OFFSET Position
Neutral position
when setting plus
Neutral position
for Normal
OFFSET Position Neutral position
when setting minus
ENTER
THROTTLE FUNCTION/TH-FUNCTION
ENTER
Trigger Control Input
OFFSET Position
when setting minus
BACK
BACK
３２