Table of Contents
Advertisement
CLOCK
●A menu to control the calendar and the clock display on the top screen and the time used.
●There are resettable [ON TIME1] that is a guideline for replacing and recharging the batteries
and [ON TIME2] that is a guideline for overhaul of the main body unit.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [CLOCK] with the multi-selector and determine
with the Enter operation.
3)Set the CLOCK feature with the multi-selector.
Because setting the clock is necessary for managing
log data, make sure to set the calendar and the clock.
SETUP
●Select a language for the screen display during setting up and set up the unit of the temperature display
for Telemetry data and the opening logo display when the power
switch is turned on.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [SETUP] with the multi-selector and determine with
the Enter operation.
3)Select items to set with the multi-selector and adjust.
○Setting Items
LANGUAGE (Display Language)：ENG/JPN
UNIT (Unit of the temperature for Telemetry)：C/ F
BOOT (Opening logo when the power switch is turned on)
：DEMO/NONE
RESUME (Resume)：OFF/ON
○Default
LANGUAGE：ENG
UNIT：C
BOOT：DEMO
RESUME：OFF
*When Resume is set to ON, it memorizes the menu at the time when power is turned off.
ENTER
BACK
ENTER
BACK
５８
Advertisement
Table of Contents
