Logger - Sanwa MT-44 Manual

Usage of each feature
TELEMETRY SETTING
●Set each feature of Telemetry. Select the feature to set with the select button.
・ TLM1/TLM2: Setting the Telemetry Data of Temperature/Speed
[NAME] Up to 3 characters of data names of TLM1/TLM2 are changeable.
[UNIT] Setting the Temperature and changing the Speed display.
(C/ F/KM [Speed unit is changeable])
[MAX] Setting the graphʼs maximum value when displaying the data as a
graph.
[ALERT] Activates the alarm at the set temperature.
(*It cannot set for displaying the speed.)
[MIN] Setting the graphʼs minimum value when displaying the data as
a graph.
・ RPM: Setting the Speed figured from the number of rotation data
[UNIT] Switching the number of rotation and the speed display
(RPM, km/h, mph)
[MAX SCALE] Setting the graphʼs minimum value when displaying
the data as a graph.
・ RATIO: When setting RATIO RPM sensor in the subtracted position,
you can display the number of rotations of the motor and e ngine after
calculating backward by setting RATIO.
○Setting range: 00.001～64.999
○Default:
・ 10COUNT DIST ：When setting to [10 Count Distance] Speed display,
○Setting range: 1cm～255cm
○Default:
・ VOLT: Alarm is activated at the set voltage corresponding to the
Telemetry Data and LED flashes.
[MAX VOLT] Setting the maximum temperature
○Setting range: 3.0V～9.0V
○Default: 9.0V
[ALERT VOLT] Setting the Alarm Activation Voltage
○Setting range: 3.0V～9.0V
○Default:
1) Select [LOGGER] with the multi-selector and determine with t he
Enter operation.
2) Select [TELEMETRY SETTING] with the multi-selector and
determine with the Enter operation.
3) Select the features to set with the Select button and adjust
various settings with the multi-selector.
４３
01.000
the RPM sensor measures the moving distance that
has been detected 10 times, calculate the speed and
displays it by setting the value.
30cm
3.8V

LOGGER

TELEMETRY
ENTER BACK
ENTER BACK
SELECT BUTTON
SELECT BUTTON
SELECT BUTTON