Before using
Adjusting the steering and throttle tension
With MT-44, the user can easily adjust the tension of the steering/throttle trigger to match operation of
the steering/throttle to the user's preference.
Adjusting the steering tension
By inserting a hexagon wrench driver
(1.5mm) to the place where the arrow is
pointing at in the illustration on the right and
turning, you can adjust the tension of the
steering spring.
*The spring tension is the softest at the time
when the product is shipped out from the
factory. As you tighten with a hexagon
wrench driver (1.5mm), the spring tension
will be hardened.
Adjusting TH trigger tension
By inserting a hexagon wrench driver
(1.5mm) to the place where the arrow is
pointing at in the illustration on the right and
turning, you can adjust the tension of the
throttle spring.
The user can choose a grip pad from two types of normal/small to suit the size of the user's hand.
(The normal size is installed at the factory.)
Do not pull forcefully because it's locked to the grip of the receiver with tabs of the grip pad (at 11 locations).
Grip Pad
(Small)
Tabs
(11 locations)
Adjusting the grip pad
Grip Pad
(Normal)
6