Table of Contents
Advertisement
BATTERY
●You can change the voltage setting of the battery alarm of the transmitter.
●By selecting Type [DRYx3 (Batteries)/Ni-MHx3 (Nickel Hydride)/Li-Pox1 (Lithium Polymer),
CUSTOM], you can set the alarm easily.
*When selecting CUSTOM with the Type,
you can set ALERT VOLT that sets voltage to make
Alarm go off and LIMIT VOLT of the lower voltage.
●TH SLOW (Throttle Slow) is a feature to limit (50%) the
operating quantity of the throttle's high side when
the battery voltage of the transmitter becomes LIMIT VOLT
(Fail-Safe feature).
1)Select [SYSTEM] with the multi-selector and determine with
the Enter operation.
2)Select [BATTERY] with the multi-selector and determine with
the Enter operation.
3)Setting TYPE
Set TYPE for the battery to be used with the multi-selector.
○Setting range:
DRYx3 (Batteries)
Ni-MHx3 (Nickel Hydride)
Li-Pox1 (Lithium Polymer)
CUSTOM: ALERT VOLT 3.0 ~ 5.0v
○Default: DRYx3 (Batteries)
BUZZER
●You can set operating sounds of key operation, Trim and Switch and the buzzer scales.
●For key operation only, you can set the first and last half of the operation sound.
●You can set 5 steps of the volume and 7 types of scales.
1)Select [SYSTEM] with the multi-selector and determine
with the Enter operation.
2)Select [BUZZER] with the multi-selector and determine
with the Enter operation.
3)Setting Tone and Volume
You can switch between Tone (scales) and Volume
(Sound Volume) with Select button operation.
Select an item to change setting to adjust.
○ Setting Items: KEY-CLICK
TLM1-ALERT
TLM2-ALERT
VOLT-ALERT
TIMER
INTERVAL
LAP-NAVI
*You can set the first and last half of the operation sound for
KEY CLICK tone (scales).
○Setting range: TONE 1~ 7
VOLUME OFF ~ 5
○Default : VOLUME 4
TONE 1 (KEY CLICK 1 ->1]
LIMIT VOLT: 2.7 ~ 5.0v
ENTER
BACK
ENTER
BACK
ENTER
BACK
５６
Advertisement
Table of Contents
